Uplander AWD V6-3.5L VIN 8 (2005)
Dome Lamp Switch: Service and Repair
DOME LAMP OVERRIDE SWITCH REPLACEMENT
REMOVAL PROCEDURE
1. Remove the overhead console screws.
2. Grasp the overhead console and pull downward in order to disengage the fasteners. Refer to Console Replacement - Overhead in Interior Trim.
3. Disconnect the electrical connectors from the overhead console.
4. Remove the dome lamp override/multi-function switch (5) by using pliers in order to compress the retainers while pulling the switch away from the
housing.
INSTALLATION PROCEDURE