chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Underhood Electrical Center or Junction Block Replacement|Page 11426 > < Underhood Electrical Center or Junction Block Replacement|Page 11424

Uplander AWD V6-3.5L VIN 8 (2005)

Page 5
background image

6. Install the underhood electrical center cover (1) to the electrical center base (6).
7. Connect the negative battery cable.
8. Close the hood.
9. Perform the power sliding door re-initialization procedure. Refer to Actuator Control Module - Power Sliding Door (PSD) Programming and

Setup in Doors.

Underhood Electrical Center or Junction Block Replacement|Page 11426 > < Underhood Electrical Center or Junction Block Replacement|Page 11424