Uplander AWD V6-3.5L VIN 8 (2005)
1. Install a new EGR valve gasket.
2. Install the EGR valve.
3. Install the EGR valve bolts.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the bolt to 30 N.m (22 lb ft).
4. Install the EGR pipe to the EGR valve.
5. Install the EGR pipe.
Tighten the bolt to 25 N.m (18 lb ft).
6. Connect the electrical connector (1) to the EGR valve (2).
