Uplander AWD V6-3.5L VIN 8 (2005)
Fuel Line Coupler: Service and Repair
Quick Connect Fitting(S) Service (Metal Collar)
QUICK CONNECT FITTING(S) SERVICE (METAL COLLAR)
TOOLS REQUIRED
J 37088-A Fuel Line Disconnect Tool Set
REMOVAL PROCEDURE
CAUTION: Refer to Gasoline/Gasoline Vapors Caution in Service Precautions.
1. Relieve the fuel system pressure before servicing any fuel system connection. Refer to the Fuel Pressure Relief Procedure. See: Fuel Filter/Fuel
Pressure Release/Service and Repair/Fuel Pressure Relief Procedure
2. Remove the retainer from the quick-connect fitting.
3. Blow dirt out of the fitting using compressed air.
CAUTION:
-
Refer to Fuel and Evaporative Emission (EVAP) Hose/Pipe Connection Cleaning Notice in Service Precautions.
-
Refer to Safety Glasses Caution in Service Precautions.
4. Choose the correct tool from the J 37088-A for the size of the fitting. Insert the tool into the female connector, then push inward in order to release
the locking tabs.
5. Pull the connection apart.