Uplander AWD V6-3.5L VIN 8 (2005)
Air Cleaner Fresh Air Duct/Hose: Service and Repair
AIR CLEANER INTAKE DUCT REPLACEMENT
REMOVAL PROCEDURE
1. Loosen the 2 intake air duct clamps (1) from air cleaner housing (2) and the throttle body.
2. Remove the air cleaner intake duct from the air cleaner housing and throttle bottle.
INSTALLATION PROCEDURE
1. Install the air cleaner intake duct to the air cleaner housing (2) and the throttle bottle.
2. Tighten the 2 intake air duct clamps (1).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the clamps to 2 N.m (18 lb in).