Uplander AWD V6-3.5L VIN 8 (2005)
Door Module: Service and Repair
Door Module Replacement - Front
Removal Procedure
1. Remove the door trim panel. Refer toTrim Panel Replacement - Side Front Door (See: Body and Frame/Doors, Hood and Trunk/Doors/Front
Door/Front Door Panel/Service and Repair) .
2. Remove the water deflector. Refer to Water Deflector Replacement - Front Door. See: Body and Frame/Doors, Hood and Trunk/Doors/Front
Door/Front Door Panel/Service and Repair
3. Remove the front door speaker. Refer to Speaker Replacement - Front in Entertainment.
4. Disconnect the door wiring harness from the body harness.
5. Disconnect the sash from the glass by squeezing the tabs on both of the glass attachment clips at the same time. With the tabs pressed down, slide
the sash in the direction of the snap tabs until the sash clips clear the glass attachment clips.
6. Slide the glass (1) full up and tape in place to the door window frame (2).