Uplander AWD V6-3.5L VIN 8 (2005)
3. Install the electrical connection to the battery terminal on the solenoid.
Tighten the battery terminal nut to 17 N.m (13 lb ft).
4. Install the electrical connections to the S terminal on the solenoid.
Tighten solenoid S terminal nut to 3 N.m (27 lb in).
5. Install the flywheel inspection cover.
6. Install the flywheel inspection cover bolts.
Tighten the flywheel inspection cover bolts to 10 N.m (89 lb in).
7. Lower vehicle.
8. Connect the negative battery cable.
