Uplander AWD V6-3.5L VIN 8 (2005)
Power Steering Pump: Service and Repair
Power Steering Pulley Replacement
Power Steering Pulley Replacement
^
Tools Required
-
J 37609-A Power Steering Pump Pulley Remover
-
J 25033-C Pulley Installer
Removal Procedure
1. Remove the drive belt.
2. Remove the power steering hoses from the power steering hose retainers.
Important: Do NOT disconnect the power steering hoses from the power steering pump.
3. Remove the power steering pump.
4. Use J 37609-A in order to remove the pump pulley.
Installation Procedure