Uplander AWD V6-3.5L VIN 8 (2005)
17. Connect the vehicle harness connector (4) to the RF side impact module yellow connector (1).
18. Install the CPA to the RF side impact module connector (1).
19. Install the Air Bag Fuse.
20. Install the cover for the underhood fuse center.
21. Use caution while reaching in and turn the ignition switch to the ON position.The AIR BAG indicator will flash then turn OFF.
22. Perform the Diagnostic System Check - Vehicle if the AIR BAG warning indicator does not operate as described. Refer to Diagnostic System
Check - Vehicle.