Uplander AWD V6-3.5L VIN 8 (2005)
5. Connect the upper control arm to the knuckle.
6. Connect the shock absorber to the lower control arm.
7. Connect the height sensor link to the lower control arm as necessary.
8. Install the backing plate and the wheel bearing.
9. Connect the drive axle to the wheel bearing/hub.
10. Install the stabilizer shaft link to the lower control arm.
11. Install the tie rod to the knuckle.
12. Install the brake rotor.
13. Install the brake caliper bracket.
14. Install the brake caliper.
15. Install the rear wheel.
16. Lower the vehicle.
