Uplander AWD V6-3.5L VIN 8 (2005)
Axle Nut: Service and Repair
Wheel Stud Replacement
^
Tools Required
-
J 6627-A Tie Rod Puller
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel assembly.
3. Remove the brake caliper and bracket. Hang the caliper and the bracket from the vehicle. DO NOT allow the caliper and the bracket to hang by
the brake hose.
4. Remove the brake rotor.
5. Use the J 6627-A in order to extract the stud (1) from the hub (2).
Installation Procedure