Uplander AWD V6-3.5L VIN 8 (2005)
Output Shaft: Service and Repair
Output Shaft Replacement (M15)
^
Tool Required
-
J 42562 Axle Removal Wedge
Removal Procedure
1. Remove the case extension housing.
2. Disconnect the left drive axle from the transaxle.
3. Rotate the differential carrier until the end of the output shaft can be seen and the differential pinion shaft (701) is in a horizontal position.
4. Place the J 42562 between the end of the output shaft and the differential pinion shaft.
5. Using a hammer, hit the end of the axle removal tool in order to compress the output shaft compression ring (512) and push the output shaft
through the differential side gear.