chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Pressure Regulating Solenoid, A/T > < A/T - 2-3 Upshift or 3-2 Downshift Clunk Noise|Page 9193

Uplander AWD V6-3.5L VIN 8 (2005)

Page 3
background image

2. Install the fourth clutch bearing (511) onto the output shaft (510).
3. Hold the front differential carrier in place and carefully install the output shaft (510) into the transmission through the left wheel opening. Extend

the output shaft through the differential side gear.

4. Install the case extension housing. 
5. Connect the left drive axle to the transaxle.

Pressure Regulating Solenoid, A/T > < A/T - 2-3 Upshift or 3-2 Downshift Clunk Noise|Page 9193