Uplander AWD V6-3.5L VIN 8 (2005)
Seals and Gaskets: Service and Repair
Filler Tube and Seal Replacement
Filler Tube and Seal Replacement
Removal Procedure
1. Remove the oil indicator from the filler tube.
2. Remove the air cleaner assembly.
3. Remove the retaining nut from the EGR at the top of the filler tube.
4. Raise and support the vehicle. Refer to Vehicle Lifting.
5. Remove the lower retaining bolt at the base of the filler tube.
6. Remove the fluid filler tube.
7. Remove the fluid filler tube seal.
Installation Procedure
Important: Do NOT place the fluid filler tube seal on the fluid filler tube when installing the tube or damage to the seal will result.
