Uplander AWD V6-3.5L VIN 8 (2005)
Transmission Mount: Service and Repair
Automatic Transmission Mount Replacement
Automatic Transmission Mount Replacement
Removal Procedure
1. Remove the transaxle mount bracket.
2. Remove the transaxle mount lower nuts to the transaxle mount frame bracket.
3. Remove the transaxle mount from the transaxle mount frame bracket.
Installation Procedure
1. Install the transaxle mount to the transaxle mount frame bracket.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the transaxle mount lower nuts to the transaxle mount frame bracket.
^
Tighten the nuts to 47 Nm (35 ft. lbs.).
3. Install the transaxle mount bracket to the transaxle.