Uplander AWD V6-3.5L VIN 8 (2005)
proper torque or a NEW spacer must be installed.
13. Apply sealant GM P/N 12346004 (Canadian P/N 10953480), or equivalent to both sides of the shim.
14. Align the reference marks and install the shim (2) to the transfer case.
15. Install the extension housing (1) and bolts (3) to the shim and transfer case.
^
Tighten the extension housing bolts to 32 Nm (24 ft. lbs.).
16. Install the extension housing drain plug (1) and gasket to the extension housing.
^
Tighten the plug to 32 Nm (24 inch lbs.).
17. Remove the extension housing fill plug (2) and gasket.
18. Fill the extension housing with gear oil.
19. Install the extension housing fill plug and gasket.
^
Tighten the plug to 28 Nm (21 inch lbs.).
