Uplander AWD V6-3.5L VIN 8 (2005)
1. Position the left hand side weatherstrip end 50 mm (1.96 in) from the lower forward corner of the window opening.
2. Using a roller-type tool, begin at (2) and roll the weatherstrip (1) forward up the vertical window opening edge on the pinchweld and continue
around the periphery of the entire flange back to (2).
3. Ensure there are no wrinkles and the window corners are secured to the flange radius.
4. Install the body side quarter window into the opening. Refer toQuarter Window Replacement (With A20 Power) (See: Service and
Repair/Quarter Window Replacement (With A20 Power))Quarter Window Replacement (Without A20 Manual) (See: Service and
Repair/Quarter Window Replacement (Without A20 Manual)) .
