Uplander AWD V6-3.5L VIN 8 (2005)
4. Install the wiper arm nut (4).
NOTE: Refer to Fastener Notice in Service Precautions.
IMPORTANT: Hold the wiper arm into position (1) while tightening the nut.
Tighten the nut to 48 N.m (35 lb ft).
5. Install the wiper arm nut cover (3)
6. Connect the washer nozzle hose to the washer pump hose (5).
7. Close the hood.
8. Inspect the wipers for proper operation.
