Uplander AWD V6-3.5L VIN 8 (2005)
Attach the piece of foam to the witness mark on the liftgate as shown above.
Tighten the rear wiper assembly bolts.
Tighten
Tighten the rear wiper assembly bolts to 6 N.m (53 lb in).
Install the rear liftgate trim panel. Refer to Liftgate Trim Panel Replacement in SI.
Verify that the noise is gone.
Parts Information
Order Adhesive Back Shim Stock from Kent Automotive at 1-888-YES-KENT or online at www.kent-automotive.com.
Warranty Information
For vehicles repaired under warranty, use the table.