Uplander FWD V6-3.5L VIN L (2006)
6. Loosen the 2 hidden fasteners from the upper rear corners of the front fascia.
7. Remove the front bumper fascia from the vehicle.
8. Remove the DRL lamps from the fascia.
9. Remove the 4 screws from the lower fascia.
10. Remove the impact bar energy absorber.
Installation Procedure
1. Install the DRL lamps to the fascia, connect the wiring as fascia is put on the vehicle.
2. Position the energy absorber to the lower fascia.
3. Install the screws in order to secure the energy absorber to the lower fascia.
4. Align the front bumper fascia (1) to the front impact bar and to the body.
5. Install the push-in retainers (3) to the upper front bumper fascia.
