Uplander FWD V6-3.5L VIN L (2006)
Front Door Interior Handle: Service and Repair
Door Handle Replacement - Front Inside
Door Handle Replacement - Front Inside
Removal Procedure
1. Remove the front door water deflector. Refer to Water Deflector Replacement - Front Door (See: Front Door Panel/Service and Repair) .
2. Using a small flat-bladed tool, remove the front door inside handle from the lock module.
3. Pull back on the door inside handle assembly.
4. Separate the upper and lower portions from each other. Slide the upper and lower portions off the lock rods.
Installation Procedure
1. Replace the upper and lower portions on the lock rods. Slide the upper and lower portions together.