Uplander FWD V6-3.5L VIN L (2006)
Power Sliding Door Switch: Service and Repair
Power Sliding Door (PSD) On/Off-Open/Close Overhead Switch Replacement
POWER SLIDING DOOR (PSD) ON/OFF-OPEN/CLOSE OVERHEAD SWITCH REPLACEMENT
REMOVAL PROCEDURE
1. Remove the courtesy lamp lens.
2. Remove the overhead console screw.
3. Grasp the overhead console and pull downward in order to disengage the fasteners.
4. Disconnect the electrical connectors from the overhead console.
5. Remove the power sliding door on/off multifunction switch (5) by using pliers in order to compress the retainers while pulling the switch away
from the housing.
