Uplander FWD V6-3.5L VIN L (2006)
Hood Latch Release Cable: Service and Repair
Hood Latch Release Cable Replacement
Removal Procedure
1. Open and support the hood.
2. Remove the hood latch cable (2) from the hood latch (1).
3. Remove the hood latch cable retaining clips (2).
4. Attach a length of mechanics wire to the hood latch cable prior to removal. This lead will assist in reinstallation of the new hood latch cable.
5. Remove the hood release handle. Refer to Hood Latch Release Handle Replacement (See: Hood Latch/Service and Repair) .
