Uplander FWD V6-3.5L VIN L (2006)
4. Remove the trailer hitch assembly from the vehicle.
Installation Procedure
Notice: Refer to Fastener Notice in Cautions and Notices.
1. Install the trailer hitch onto the vehicle.
*
Tighten all 0.5 in diameter carriage bolts to 101 N.m (75 lb ft)
*
Tighten all M10 bolts to 54 N.m (40 lb ft).
2. Install the automatic level control compressor assembly onto the vehicle. Refer to Automatic Level Control Air Compressor Air Filter
