Uplander FWD V6-3.5L VIN L (2006)
1. Position the overhead console in the vehicle.
2. Connect the electrical connectors.
3. Align the retainers to the openings in the vehicle.
4. Push the overhead console upward until the retainers engage securing the overhead console to the vehicle.
Notice: Refer to Fastener Notice in Cautions and Notices.
5. Install the overhead console screw.
Tighten the screw to 2 N.m (18 lb in).
6. Install the courtesy lamp lens.
Roof Console Filler and Compartment Door Latch Replacement
Roof Console Filler and Compartment Door Latch Replacement
