Uplander FWD V6-3.5L VIN L (2006)
Installation Procedure
1. Install rear quarter trim panel to vehicle.
2. Feed the seat belts through the openings in the trim panel.
3. Install the rear quarter trim retainers by aligning the retainer with the holes and then pushing the retainers to secure.
4. Install the upper cargo net retainers.
5. Install the liftgate sill plate. Refer to Door Sill Plate Replacement - Liftgate (See: Scuff Plate/Service and Repair) .
6. Install the seat belt anchor retaining bolts. Refer to Seat Belt Retractor Replacement - Rear (LWB w/RPO E59) and Seat Belt Retractor
Replacement - Rear (SWB).
7. Install the rear seat belt escutcheons.
8. Install the rear upper finish panel trim. Refer to Trim Panel Replacement - Body Lock Pillar Upper (See: ) .
9. Install the rear upper finish panel trim. Refer to Finish Panel Replacement - Upper Rear Trim (See: ) .
10. Install the rear seats. Refer to Seat Replacement - Rear (See: Seats/Service and Repair/Removal and Replacement/Seat Replacement - Rear) .
Trim Panel Replacement - Rear Quarter - Right