Uplander FWD V6-3.5L VIN L (2006)
LUGGAGE CARRIER CROSS RAIL REPLACEMENT
REMOVAL PROCEDURE
1. Remove the luggage carrier.
2. Turn the luggage carrier upside down and place on a clean flat surface.
3. Remove the luggage carrier cross rail screws from the luggage carrier side rails.
4. Remove the luggage carrier cross rail from the luggage carrier side rails.
INSTALLATION PROCEDURE
1. Install the luggage carrier cross rail to the luggage carrier side rail.
2. Install the luggage carrier cross rail screws to the luggage carrier.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screws to 2 N.m (18 lb in).
3. Install the luggage carrier.
Luggage Carrier New Installation
LUGGAGE CARRIER NEW INSTALLATION
1. Turn the luggage carrier side rails upside down on a clean, flat surface.