Uplander FWD V6-3.5L VIN L (2006)
3. Install the park brake cable end to the park brake lever clevis.
4. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
5. Install the park brake cable to the park brake cable retainers.
6. Install the park brake cable end to the park brake cable connector.
7. Adjust the park brake cable equalizer. Refer to Park Brake Adjustment.
8. Lower the vehicle.
9. Fold the carpet back in place.
10. Install the left-side carpet retainer.
11. Install the left-side instrument panel insulator.
