Uplander FWD V6-3.5L VIN L (2006)
Cruise Control Switch: Service and Repair
CRUISE CONTROL SWITCH REPLACEMENT
REMOVAL PROCEDURE
1. Remove the steering wheel from the vehicle.
2. Remove the steering wheel electrical harness grounding screw (1).
3. Release the electrical harness connector retainer clip (2) from the steering wheel trim cover.
4. Remove the steering wheel rear trim cover screws (4).
5. Remove the cruise control switch screws (2).
6. Remove the steering wheel trim cover (3).
7. Remove the cruise control switch (1).
INSTALLATION PROCEDURE
