Uplander FWD V6-3.5L VIN L (2006)
Tighten the engine coolant temperature sensor to 23 N.m (17 lb ft).
3. Connect the ECT sensor harness connector. Push in the connector until a click is heard, then pull back to confirm a positive engagement.
4. Fill engine coolant to proper level. Refer to Draining and Filling Cooling System (Static Fill LX9) Draining and Filling Cooling System
(Vac-N-Fill) Draining and Filling Cooling System (Static Fill LZ9) in Cooling System. See: Service and Repair
5. Install the air intake duct.
