Uplander FWD V6-3.5L VIN L (2006)
3. Install the CPAs to the left and right front end sensor connector.
4. Install the Air Bag Fuse.
5. Install the cover for the underhood fuse center.
6. Use caution while reaching in and turning the ignition switch to the ON position.The AIR BAG indicator will flash, then turn OFF.
7. Perform the Diagnostic System Check - Vehicle, if the AIR BAG warning indicator does not operate as described. Refer to Diagnostic System
Check - Vehicle. See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Diagnostic Trouble Code Tests and
Associated Procedures
