Uplander FWD V6-3.5L VIN L (2006)
1. Position the EVAP canister purge valve (3) and gasket (2) to the intake manifold.
2. Install the EVAP canister purge valve bolt (1).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the bolt to 10 N.m (89 lb in).
3. Connect the EVAP canister purge pipe to the EVAP canister purge valve.
4. Connect the electrical connector (6) to the EVAP canister purge valve (5).
