Uplander FWD V6-3.5L VIN L (2006)
Fuel Line Coupler: Service and Repair
Metal Collar Quick Connect Fitting Service
METAL COLLAR QUICK CONNECT FITTING SERVICE
TOOLS REQUIRED
J 37088-A Fuel Line Disconnect Tool Set
REMOVAL PROCEDURE
CAUTION: Refer to Gasoline/Gasoline Vapors Caution in Service Precautions.
1. Relieve the fuel system pressure before servicing any fuel system connection. Refer to the Fuel Pressure Relief.
2. Remove the retainer from the quick-connect fitting.
3. Blow dirt out of the fitting using compressed air.
CAUTION:
-
Refer to Fuel and Evaporative Emission Hose/Pipe Connection Cleaning Notice in Service Precautions.
-
Refer to Safety Glasses Caution in Service Precautions.
4. Choose the correct tool from the J 37088-A for the size of the fitting. Insert the tool into the female connector, then push inward in order to release
the locking tabs.
5. Pull the connection apart.
