Uplander FWD V6-3.5L VIN L (2006)
The removal of the EVAP purge solenoid is being done so that the EVAP purge solenoid will not be damaged in the EGR valve removal.
Disconnect the EVAP purge solenoid electrical connector and remove the bolt. Remove the EVAP purge solenoid from the engine and reposition and
secure the EVAP purge solenoid with mechanic wire (1).
Remove the positive crankcase ventilation (PCV) fresh air tube (1) from the air cleaner outlet duct and the back of the engine, then remove PCV fresh air
tube from the vehicle.
Rotate the heater hoses (1) away from the EGR valve.
With the heater hoses rotated (1) you now have access to the EGR valve.
