chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Restraints - Seat Belt Lamp On/Flickering|Page 12752 > < Restraints - Seat Belt Lamp On/Flickering
Page 2
background image

Reassemble the seat belt buckle assembly, routing the chime wire harness out the outboard side of the assembly. Route and connect the chime wire
harness to the seat assembly.

Tighten the seat adjuster bolt.

Tighten

Tighten the seat adjuster bolt to 45 N.m (33 lb ft).

Attach the seat belt buckle assembly to the seat.

Tighten

Tighten to 53 N.m (39 lb ft).

Attach the side panel and storage tray to the seat.

Tighten

Tighten to 2 N.m (18 lb in).

Install seat assembly in the vehicle.

Tighten

Tighten to 45 N.m (33 lb ft).

Warranty Information

Restraints - Seat Belt Lamp On/Flickering|Page 12752 > < Restraints - Seat Belt Lamp On/Flickering