chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Campaign - Rem. Start Interferes/Seat Belt Buzzer|Page 12814 > < Campaign - Rem. Start Interferes/Seat Belt Buzzer|Page 12812
Page 3
background image

Important:

Verify that the procedure was successful by cycling the ignition key to the OFF position and then turn the ignition key to the the RUN position
with the engine OFF Perform the service procedure a second time to verify that the Enhanced Buckle Up Reminder is ENABLED.

1.

Turn the vehicle ignition key to the RUN position with the engine OFF.

2.

Connect the Tech 2 to the vehicle's data link connector (DLC) under the instrument panel.

3.

Turn the Tech 2 "ON" by pressing the power button.

4.

Press "ENTER" to access the "MAIN MENU".

5.

Use the "UP" and "DOWN" buttons (arrows) on the Tech 2 to move the highlight bar to the selections described in the following steps. Refer to
the appropriate vehicle line instructions below.

Buick LaCrosse/Allure

Follow the steps below from the Tech 2 Main Menu screen. Select:

1.

Press Enter.

2.

Press F0: Diagnostics.

3.

Press 6 for 2006 and then choose Passenger Car.

4.

Press 4 for Buick, then choose W, and then choose LaCrosse/Allure.

5.

Press F6: Restraints and then choose Seatbelts.

6.

Press F4: Module Setup.

7.

Press F0: Supplemental Inflatable Restraint.

8.

Press F0: Buckle Up Reminder.

9.

Follow the on-screen instructions. To turn ON Enhanced Buckle Up Reminder, Select ENABLE.

Important:

In the "No Communication with Vehicle screen appears after following the steps above to turn on Enhanced Buckle Up Reminder, then rerun
the procedure.

Pontiac Grand Prix

Follow the steps below from the Tech 2 Main Menu screen. Select:

1.

Press Enter.

2.

Press F0: Diagnostics.

3.

Press 6 for 2006 and then choose Passenger Car.

4.

Press 4 for Pontiac and then choose W.

5.

Press F6: Restraints and then choose Seatbelts.

6.

Press F4: Module Setup.

7.

Press F0: Supplemental Inflatable Restraint.

8.

Press F0: Buckle Up Reminder.

9.

Follow the on-screen instructions. To turn ON Enhanced Buckle Up Reminder, Select ENABLE.

Important:

In the "No Communication with Vehicle screen appears after following the steps above to turn on Enhanced Buckle Up Reminder, then rerun

Campaign - Rem. Start Interferes/Seat Belt Buzzer|Page 12814 > < Campaign - Rem. Start Interferes/Seat Belt Buzzer|Page 12812