Uplander FWD V6-3.5L VIN L (2006)
Seat Belt Tensioner: Service and Repair
Seat Belt Retractor Pretensioner Replacement - Right Front
SEAT BELT RETRACTOR PRETENSIONER REPLACEMENT - RIGHT FRONT
REMOVAL PROCEDURE
1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 9.
2. Remove the front bucket seat.
3. Remove the front seat belt anchor from the rear outboard stud.
4. Open the seat belt guide loop cover.
5. Remove the nut from seat belt guide loop.
6. Remove the seat belt guide loop from the guide adjuster bracket.
7. Remove the center pillar lower trim.
8. Remove the bolt from the seat belt retractor.
