Uplander FWD V6-3.5L VIN L (2006)
Suspension Strut / Shock Absorber: Service and Repair
Strut, Strut Component and/or Spring Replacement
Strut, Strut Component and/or Spring Replacement
^
Tools Required
-
J 42991 Strut Rod Nut Socket
-
J 45400 Strut Spring Compressor
Disassembly Procedure
1. Remove the strut from the vehicle.
2. Install the strut (2) in the J 45400 (1).
3. Important:
The spring is compressed when the strut moves freely.
Turn the spring compressor forcing screw (1) until the coil spring (2) is compressed.
4. Use a 45 TORX socket in order to hold the strut shaft. Use the J 42991 to remove the upper strut mount nut
5. Remove the strut from the J 45400.
6. Loosen the compressor forcing screw (1) until the upper strut mount and coil spring (2) may be removed.
7. Remove the upper strut mount and the coil spring from the J 45400.
Assembly Procedure
1. Install the coil spring and upper strut mount to the J 45400.