Uplander FWD V6-3.5L VIN L (2006)
Wheel Bearing: Service and Repair
Rear Suspension
Wheel Bearing/Hub Replacement - Rear (Without Independent Rear Suspension)
Removal Procedure
1. Important:
Five lug pattern hub shown will work on vehicles with six lug pattern.
Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Remove the brake caliper.
4. Remove and DISCARD the wheel bearing/hub bolts.
5. Remove the wheel bearing/hub.
6. Disconnect the wheel speed sensor electrical connector.
Installation Procedure
