Uplander FWD V6-3.5L VIN L (2006)
3. Notice:
Refer to Fastener Notice in Service Precautions.
Install the case extension housing bolts (5).
Tighten the bolts (5) to 36 Nm (27 ft. lbs.).
4. Install the vehicle speed sensor.
5. Install the transaxle brace.
6. Connect the right drive axle to the transaxle.
7. Lower the vehicle.
8. Notice:
Do NOT overfill the transaxle. The overfilling of the transaxle causes foaming, loss of fluid, shift complaints, and possible damage to the
transaxle.
Adjust the fluid level. Refer to the following information.
^
Transmission Fluid Checking Procedure.
^
Fluid and Lubricant Recommendations in Maintenance and Lubrication
^
Capacities - Approximate Fluid
9. Inspect for completion of the repairs.
10. Inspect for fluid leaks.
