Uplander FWD V6-3.5L VIN L (2006)
Install the control valve body bolts (375, 379 and 381) that mount the fluid pressure manual valve position switch to the control valve body (300).
^
Tighten the control valve body bolt (375) to 12 Nm (106 inch lbs.).
^
Tighten the control valve body bolt (379) to 16 Nm (12 ft. lbs.).
^
Tighten the control valve body bolt (381) to 8 Nm (70 inch lbs.).
3. Connect the transaxle wiring harness.
4. Install the case side cover.
