Uplander FWD V6-3.5L VIN L (2006)
3. Install the automatic transaxle range selector cable to the steering column bracket (5).
4. Install the retaining clip (4) to the automatic transaxle range selector cable (3).
5. Install the automatic transaxle range selector cable (2) to the column control lever (1).
6. Install the knee bolster.
7. Install the automatic transaxle range selector cable to the automatic transaxle range selector cable bracket (4).
8. Install the automatic transaxle range selector cable (1) to the automatic transaxle range selector lever (5).
9. Install the retaining clip (2) to the automatic transaxle range selector cable (3).
10. Adjust the automatic transaxle range selector cable.
11. Install the throttle body air inlet duct.
