Uplander FWD V6-3.5L VIN L (2006)
9. Notice:
Refer to Fastener Notice in Service Precautions.
Crimp the eared clamp (1) using the J 35910, a breaker bar, and a torque wrench.
Tighten the eared clamp to 136 Nm (100 ft. lbs.).
10. Check the gap dimension, continue tightening until the gap dimension is reached.
11. Put a light coat of grease from the service kit on the ball grooves of the inner race and the outer race.
12. Hold the inner race 90 degrees to centerline of cage with the lands of the inner race (1) aligned with the windows of the cage (2) and insert the
inner race into the cage.
