Uplander FWD V6-3.5L VIN L (2006)
2. Position the wiper arm onto the wiper arm pivot shaft.
3. Align the wiper blade tip to the horizontal mark on the windshield within the blackout area (a or b).
4. Install the wiper arm nut (4).
NOTE: Refer to Fastener Notice in Service Precautions.
IMPORTANT: Hold the wiper arm into position (1) while tightening the nut.
Tighten the nut to 48 N.m (35 lb ft).
5. Install the wiper arm nut cover (3)
6. Connect the washer nozzle hose to the washer pump hose (5).
7. Close the hood.
8. Inspect the wipers for proper operation.