Uplander FWD V6-3.5L VIN L (2006)
1. Install the rear wiper blade onto the rear wiper arm.
2. Position the rear wiper arm onto the wiper motor pivot shaft 45 mm (1.77 in) from the bottom edge of the glass (1).
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the rear wiper arm nut.
Tighten the nut to 25 N.m (19 lb ft).
4. Connect the rear wiper arm finish cover (3).
5. Inspect the rear wiper system for proper operation.