V 30 P/U 4WD V8-350 5.7L (1987)
Removing The Spindle
8. Spindle from the steering knuckle.
^
Tap the end of the spindle with a plastic or rubber mallet to break it loose from the steering knuckle
Removing The Cap And Steering Arm Fasteners
9. Upper cap and/or steering arm.
^
For the cap, remove the bolts and washers alternately as the compression spring will force the cap up.
^
For the steering arm, remove the nuts alternately as the compression spring will force the steering arm up.
10. Gasket and compression spring
11. Bolts and washers.
Removing The Lower Bearing Cap And King Pin