Venture AWD V6-3.4L VIN E (2004)
Lower Sliding Door Roller: Service and Repair
Roller Bracket Replacement - Lower
Removal Procedure
1. Remove the front edges of the sliding door inner trim panel in order to gain access to the sliding door lower roller bracket bolts.
2. Mark the location of the sliding door lower roller bracket to the sliding door with a grease pencil.
3. Support the sliding door.
4. Remove the sliding door catch with the reinforcement channel bolt at the sliding door lower track.
5. Remove the sliding door lower roller bracket bolts.
6. Remove the sliding door lower roller bracket from the lower track.
Installation Procedure
1. Install the sliding door lower roller bracket to the lower track.