Venture AWD V6-3.4L VIN E (2004)
Hood Weatherstrip: Service and Repair
Seal Replacement - Hood Front
Hood Front Seal Replacement
Tools Required
J 38778 Door Trim Pad and Garnish Clip Remover
Removal Procedure
1. Open and support the hood.
2. Use J 38778 in order to remove the push-in retainers from the hood front seal.
3. Remove the hood front seal from the hood.
Installation Procedure
Important: Install the grille prior to the hood front seal.
1. Install the hood front seal to the hood.
2. Install the push-in retainers to the hood front seal.
3. Close the hood.