Venture AWD V6-3.4L VIN E (2004)
Drink Holders: Service and Repair
Cupholder Replacement - Rear Seat
Cupholder Replacement - Rear Seat
Removal Procedure
1. Fold the cup holder to its open position.
2. Remove the cup holder screws.
3. Remove the cup holder.
Installation Procedure
1. Install the cup holder.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the cup holder screws.
Tighten the screws to 9 N.m (80 lb in).
3. Fold the cup holder to its closed position.