Venture AWD V6-3.4L VIN E (2004)
Power Door Lock Switch: Service and Repair
Power Door Lock Switch Replacement - Front - Left
POWER DOOR LOCK SWITCH REPLACEMENT - FRONT - LEFT
REMOVAL PROCEDURE
1. Use the following procedure in order to remove the left power lock switch.
1.1.
Use a flat-bladed tool at the rear of the switch mounting plate in order to release the clip.
1.2.
Lift up in order to unsnap the switch mounting plate from the front door trim panel.
2. Disconnect the electrical connectors.
3. Unsnap the power lock switch from the switch mounting plate.
INSTALLATION PROCEDURE
